Showing posts with label Rustic. Show all posts
Showing posts with label Rustic. Show all posts

Stackable Stools $35 each or 4 for $120

These stackable stools measure 35cm wide across the seat and are ideal for children to sit around a coffee table. They can also be stacked up as a shelving unit. They have all been sealed with clear enamel over the distressed paint finish.

KITCHEN / PATIO TABLE -$495

 This table has been made from a recycled pallet, with pine legs and drawers. The two drawers are full length (ie. go all the way through) and can slide either way. This table would be perfect for a kitchen, patio or other small area. Or it can even have castor wheels fitted and be used as a "floating kitchen kitchen island"

Table dimensions are approx 95cm x 90cm x 77cm high.

Don't forget to share this post on Facebook ....but, only if you like it :-)

RUSTIC DINING TABLE -$650


This eye catching table is made from recycled pallets with steel legs with colonial style braces. This gives the table a mixed appearance of "shabby chic", "industrial", and/or "rustic" depending on how it is displayed. The legs and sides could even be repainted white for a true "shabby chic" look!

The steel legs and bracing help make this table  light weight but rock solid and stable. The legs unscrew for easy transportation and moving through doorways etc.

Table dimensions are 175cm x 94cm x 77cm high

If you like this table setting please share it and like it on Facebook etc. :-)

LOVE SHELF #1 -$250

This shelf unit is made from large sections of a timber pallet (approx 160mm x 55mm). Each letter measures 45cm high x 34cm wide. Total unit height is 180cm (6 feet high). We can make these in any word you wish (4-5 letters is best)

This shelf is much stronger than all the home made ones, you see on the net. The back of each joint is reinforced with "nail plates" and each joint has been fastened with nails, construction adhesive and batten screws. A metal brace has also been added from the "E" to the "O" and a heart shaped brace added to prevent the shelf from falling forwards (folded, braced and welded checkerplate). You will never find these features on any other shelves of this style!

This shelving unit has been finished with "Whitewash"

Click here to see it being constructed






Don't forget to share this post on Facebook :-)

Multi-Use COFFEE TABLE - Under Construction -9th Oct 2014

8th Oct 2014
This arrangement consists of 4 "stools" that can be assembled to make a coffee table or stacked to make a corner unit. You could also use it as a semi-circular side table/shelves, or maybe even two sets of bed side tables. The uses are endless, and ideal for moving house or simply rearranging every now and again!

This multi-purpose unit is nearly finished. I just have to add a few more boards to one of the stools, and router the front edges or the shelves/table. I plan on staining these with a medium stain and then overcoating with a gloss white "crackled" finish. If you want something different then email Kerryn ASAP.

This has been made from recycled pallets as well as some pine lining boards and trim. Has all been glued as well as nailed. Dimensions are:

Each "stool": 40cm x 40cm x 45cm high
Coffee table: 80cm diameter, 45cm high
Corner unit: 40 cm x 40 cm x 180cm high









9th Oct 2014




Don't forget to share this post on Facebook ....but, only if you like it :-)

ROCKING CHOPPER - Harley style Rocking Horse - $250 *SOLD*







This Rocking Chopper has been made from galvanised pipe, leaf springs, coil springs, rolled sections of checker plate and a few more bits and pieces. It was then washed down with hydrochloric acid, hosed off, and left to rust. Once it had a decent coating of rust it was then wire brushed, treated and finally clear coated.

This rocking horse/chopper  is incredibly stable, and a similar one I made has regularly held 4 kids at once, standing and sitting in all sorts of positions, without ever tipping over. I can't say the same when drunken fathers have rocking competitions at parties though!

Dimensions are-
Length: 130cm
Width of rockers: 38cm
Handlebar height: 60cm
Handlebar width: 45cm
Seat height: 30cm
Rear wheel width: 160mm

If you think you can make one better yourself, then good luck getting it to balance and rock. This one almost rocks by itself. I guarantee you will have a few sitting in your garden before you get it right!

I have made a few of these in the past that had coffin tanks, two pistons for motor, springer front ends, sissy bars, custom paint jobs etc, and will be making some more soon. But, if you like that Junkyard, Ratrod look then this may be the "Rocking Chopper" for you!

This Rocking Chopper has been SOLD. 3 more currently being made, with piston motors, coffin tanks etc

Don't forget to share this post on Facebook ....but, only if you like it :-)

WINE RACK #1 - $80

We call this one the "compact wine rack" as the glasses hang between the bottles. It has been made from a recycled pallet, has been sanded, stained, distressed and then finished with clear polyurethane for a durable and long lasting finish.

This Wine Rack will easily hold 8 bottles of wine and 6 wine glasses. It is made to either sit on a bench, table, or whatever, or you can hang it on the wall if you wish.








Don't forget to share this post on Facebook ....but, only if you like it :-)

KITCHEN TABLE or ISLAND - UNDER CONSTRUCTION -4th Oct 2014 -$450 "as is"

This table has been made from a recycled pallet, with pine legs and drawers. The two drawers are full length (ie. go all the way through) and can slide either way. Still needs drawer handles fitted and maybe castor wheels if you would prefer to use it as a "kitchen island".

We can also cut thin slats of timber in either matching softwoods, or different coloured hardwoods to fill in the gaps if you prefer. Table dimensions are approx 90cm x 90cm x 77cm high.









Don't forget to share this post on Facebook ....but, only if you like it :-)